The PHANTOM ⛏️Toothpick ⛏️

Its like a 65mm Toothpick but bigger but is bigger better?

The PHANTOM is a mini freestyle quad supporting either 65mm or 2.5inch propellers on GR1103 8000kv motors. The build can either run on a 2S 450mah or 3S 300mah lipo.
The 16x16mm stack comes complete with:

• F4 FC
• 12A 4in1 ESC
• 200mW VTX

You can either buy :
PNP (Plug and Play) and add your own Receiver.
BNF ( Bind and Fly) fitted with an Frsky XM+ Receiver.

• UnmannedTech UK (Coming Soon)
• GEPRC

Just remember this is a toothpick build and the lighter the better.

See below for a full list of the specifications:

• Name: PHANTOM
• FC:STM32F411
• ESC:12A(BLheli_S)
• Motor: GEPRC GEP-GR1103 8000KV(3S 300mAh) or 5500KV(4S 300-450mAh)
• Wheelbase: 125mm
• Propeller: 65mm or 2.5inch
• VTX:5.8g 200mW
• Camera:Caddx EOS2
• Weight: 51g (without battery)

STABLE F411 Flight Controller(16*16mm)

Trending

Worlds Adrift FPV Simulator from with over 1000 places to fly

• MCU: STM32F411
• IMU: MPU6000 gyro/accelerometer (SPI)
• OSD: BetaFlight OSD w/ AT7456E chip
• BEC Output: [email protected]
• Size: 21mm*21mm
• Mounting holes: 16mm*16mm
• Integrated LC Filter
• Input voltage 2-4S LIPO
• Firmware target: MATEKF411
• Weight: 2.5g

STABLE F411 BLheli_S 4IN1 12A ESC(16*16mm)

• MCU: BB21F16G
• Continuous current: 12A
• Input voltage : 2-4S LIPO
• ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
• Size: 23mm*21mm
• Mounting hole 16*16mm
• Firmware target: Blheli_S G_H_30
• Current meter: 210
• Weight: 2.7g

STABLE F411 VTX 5.8G 200mW(16*16mm)

• Power : PIT/25/100/200mW
• Antenna interface : IPEX (UFL)
• Telemetry: IRC Tramp
• Size: 17mm*27mm
• Mounting holes: 16*16mm
• Integrated LC Filter
• Weight: 1.6g

Summary

This little guy in small, light and fun to fly so whether your looking for a first time buy and what to start with something small or looking to add something fun to your fleet.
The Phantom could be for you?