Smart port telemetry requires an inverted serial signal, but many flight controllers only include hardware inversion on the SBUS connector.Β So if you want to use SmartPort telemetry on your…
What’s new with Betaflight 3.4
With the next version of betaflight 3.4 just around the corner (expected release date of 1st July 2018), this is a quick post to highlight some of the best new…
How To Setup Any Betaflight π Flight Controller
This is short guide that takes you through the bare essentials of setting up any quadcopter (i.e. any flight controller) with BetaFlight as quickly as possible. To reiterate, we’re just…
Quadcopter not Arming? π How to Solve in BetaFlight
Maybe you have spent hours on your FPV quadcopter build, everything is configured, your receiver and motors are working, flight modes are setup.Β But as soon as you plug in…
How to Configure the SP F3 Flight Controller in Betaflight (Martian π½ Series)
This guide takes you through the full configuration of the SP F3 flight controller in BetaFlight, step-by-step. We will cover everything from installing the BetaFlight GUI software to setting up…
Wizard X220s πΎ Initial Setup Guide in BetaFlight
The wizard X220s takes what we love about the standard Wizard X220 and cranks it up to 11 with impressive performance. This article will help you get your Wizard X220s…
Kakute AIO F4 vs DYS Omnibus F4 Pro
These two flight controllers have been the talk of the town these last few months but which one is better? What are the real differences between the two and how…
Radio Receiver End Point Calibration in BetaFlight
This is a quick tips guide on how to calibrate your radio receiver in BetaFlight. You need to do this to ensure your radio is sending the full control range…
MiniCube F3 Flight Stack: Getting Started Guide
The Minicube F3 flight stack is built to be the best stack for your micro brushless FPV quadcopter. It includes everything you need in an FPV flight controller, plus more.
Setting up the Crusader GT2 with the Taranis QX7
We have now released a video going through the process of setting up your Crusader GT2 with a X4R receiver and a Taranis QX7. This video goes through the quickest…